Add default polybar config

.config/qtile/polybar/default/colors.ini

@@ -0,0 +1,30 @@
+## Copyright (C) 2020-2021 Aditya Shakya <adi1090x@gmail.com>
+## Everyone is permitted to copy and distribute copies of this file under GNU-GPL3
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[color]
+BG = #1E2128
+BGL = #2A2D34
+BGA = #808080
+FG = #D8D8D8
+AC = #62AEEF
+
+BLACK = #000000
+WHITE = #FFFFFF
+RED = #E06B74
+GREEN = #98C379
+YELLOW = #E5C07A
+BLUE = #62AEEF
+PURPLE = #C778DD
+CYAN = #55B6C2
+TEAL = #8BC5BF
+AMBER = #D4B158
+ORANGE = #D49474
+BROWN = #AC8476
+GRAY = #8C8C8C
+BLUEGRAY = #6F8A91
+PINK = #D46389
+LIME = #D7DD91
+INDIGO = #7985D0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

.config/qtile/polybar/default/config.ini

@@ -0,0 +1,318 @@
+## Copyright (C) 2020-2021 Aditya Shakya <adi1090x@gmail.com>
+## Everyone is permitted to copy and distribute copies of this file under GNU-GPL3
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Global WM Settings
+
+[global/wm]
+; Adjust the _NET_WM_STRUT_PARTIAL top value
+; Used for top aligned bars
+margin-bottom = 10
+
+; Adjust the _NET_WM_STRUT_PARTIAL bottom value
+; Used for bottom aligned bars
+margin-top = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; File Inclusion
+; include an external file, like module file, etc.
+
+include-file = ~/.config/qtile/polybar/system.ini
+
+include-file = ~/.config/qtile/polybar/default/colors.ini
+include-file = ~/.config/qtile/polybar/default/modules.ini
+include-file = ~/.config/qtile/polybar/default/decor.ini
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Bar Settings
+
+[bar/main]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor =
+
+; Use the specified monitor as a fallback if the main one is not found.
+monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = false
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 100%
+height = 26
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 0%
+offset-y = 0%
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${color.BG}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${color.FG}
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+;;background-0 = 
+
+; Value used for drawing rounded corners
+; Note: This shouldn't be used together with border-size because the border 
+; doesn't get rounded
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius-top = 0.0
+radius-bottom = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 2
+line-color = ${color.AC}
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+; The top and bottom borders are added to the bar height, so the effective
+; window height is:
+;   height + border-top-size + border-bottom-size
+; Meanwhile the effective window width is defined entirely by the width key and
+; the border is placed withing this area. So you effectively only have the
+; following horizontal space on the bar:
+;   width - border-right-size - border-left-size
+border-size = 6
+border-color = ${color.BG}
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 0
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin-left = 0
+module-margin-right = 0
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = "JetBrains Mono:size=10;3"
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+
+; text
+font-0 = "JetBrains Mono:size=10;3"
+; icons
+font-1 = "Iosevka Nerd Font Mono:size=20;7"
+; glyphs
+font-2 = "Iosevka Nerd Font Mono:size=23;8"
+; dot
+font-3 = "Iosevka Nerd Font Mono:size=18;8"
+; clock & mpd
+font-4 = "Iosevka:style=bold:size=10;4"
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbrightness
+;   modules-right = ipc clock
+
+# Default
+modules-left = LD menu RD dot-alt LD qtile RD dot cpu dot used-memory dot filesystem
+modules-center = LD date RD dot-alt LD mpd RD sep song
+;modules-center = LD date RD dot-alt LD 
+modules-right = volume dot bna dot ethernet dot LD battery RD dot-alt LD sysmenu RD
+
+# Alternate
+;modules-left = qtile 2LD cpu 3LD memory 4LD filesystem 5LD
+;modules-center = mpd
+;modules-right = 2RD volume 3RD brightness 4RD battery 5RD ethernet 6RD date sep
+
+; The separator will be inserted between the output of each module
+separator =
+
+; This value is used to add extra spacing between elements
+; @deprecated: This parameter will be removed in an upcoming version
+spacing = 0
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+; NOTE: The placeholders are not available for custom values
+wm-name = 
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = 
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = right
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 16
+
+; DEPRECATED! Since 3.3.0 the tray always uses pseudo-transparency
+; Enable pseudo transparency
+; Will automatically be enabled if a fully transparent
+; background color is defined using `tray-background`
+; tray-transparent = false
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${color.BG}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Currently supported WM's:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+; wm-restack =
+
+; Set a DPI values used when rendering text
+; This only affects scalable fonts
+; dpi = 
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+enable-ipc = true
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = 
+click-right =
+scroll-up =
+scroll-down =
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll = 
+
+;; WM Workspace Specific
+
+; bspwm
+;;scroll-up = bspwm-desknext
+;;scroll-down = bspwm-deskprev
+;;scroll-up = bspc desktop -f prev.local
+;;scroll-down = bspc desktop -f next.local
+
+;i3
+;;scroll-up = i3wm-wsnext
+;;scroll-down = i3wm-wsprev
+;;scroll-up = i3-msg workspace next_on_output
+;;scroll-down = i3-msg workspace prev_on_output
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Application Settings
+
+[settings]
+; The throttle settings lets the eventloop swallow up til X events
+; if they happen within Y millisecond after first event was received.
+; This is done to prevent flood of update event.
+;
+; For example if 5 modules emit an update event at the same time, we really
+; just care about the last one. But if we wait too long for events to swallow
+; the bar would appear sluggish so we continue if timeout
+; expires or limit is reached.
+throttle-output = 5
+throttle-output-for = 10
+
+; Time in milliseconds that the input handler will wait between processing events
+;throttle-input-for = 30
+
+; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
+screenchange-reload = false
+
+; Compositing operators
+; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
+compositing-background = source
+compositing-foreground = over
+compositing-overline = over
+compositing-underline = over
+compositing-border = over
+
+; Define fallback values used by all module formats
+;format-foreground = 
+;format-background = 
+;format-underline =
+;format-overline =
+;format-spacing =
+;format-padding =
+;format-margin =
+;format-offset =
+
+; Enables pseudo-transparency for the bar
+; If set to true the bar can be transparent without a compositor.
+pseudo-transparency = false
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+

.config/qtile/polybar/default/decor.ini

@@ -0,0 +1,47 @@
+## Copyright (C) 2020-2021 Aditya Shakya <adi1090x@gmail.com>
+## Everyone is permitted to copy and distribute copies of this file under GNU-GPL3
+
+;; DECOR _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/sep]
+type = custom/text
+content = -
+
+content-background = ${color.BG}
+content-foreground = ${color.BG}
+
+;; Dots
+
+[module/dot]
+type = custom/text
+content = 
+content-foreground = ${color.BGL}
+content-padding = 1
+content-font = 4
+
+[module/dot-alt]
+inherit = module/dot
+content-foreground = ${color.BLUEGRAY}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/LD]
+type = custom/text
+content = "%{T3}%{T-}"
+content-background = ${color.BG}
+content-foreground = ${color.BGL}
+
+[module/RD]
+type = custom/text
+content = "%{T3}%{T-}"
+content-background = ${color.BG}
+content-foreground = ${color.BGL}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+;;	    __________  ______
+;;	   / ____/ __ \/ ____/
+;;	  / __/ / / / / /_    
+;;	 / /___/ /_/ / __/    
+;;	/_____/\____/_/       
+;;
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

.config/qtile/polybar/default/launch.sh

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+
+## Copyright (C) 2020-2021 Aditya Shakya <adi1090x@gmail.com>
+## Everyone is permitted to copy and distribute copies of this file under GNU-GPL3
+
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
+
+
+# Terminate already running bar instances
+killall -q polybar
+
+# Wait until the processes have been shut down
+while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
+
+# Launch the bar
+polybar -q main -c "$DIR"/config.ini &