Migrate from ohmyzsh to prezto

.config/zsh/.aliases

@@ -1,4 +1,4 @@
-alias af=alias-finder
+# alias af=alias-finder
 alias ls=lsd
 alias lt="lsd --tree"
 alias rake='noglob bundled_rake'
@@ -6,8 +6,6 @@ alias weather='curl wttr.in/?0'
 alias gdm='gd master'
 alias s='gst .'
 alias d='gd .'
-alias ratslap="~/Downloads/ratslap/ratslap"
-alias charmce="/usr/local/bin/charmce"
 alias intel="sudo prime-select intel"
 alias nvidia="sudo prime-select nvidia"
 alias pls="sudo"
@@ -23,23 +21,26 @@ alias suod="sudo"
 alias sduo="sudo"
 alias zz='z -c'      # restrict matches to subdirs of $PWD
 alias zi='z -I'      # use fzf to select in multiple matches
-alias j=z
+alias h=z
-alias ji='z -I'
+alias hi='z -I'
-alias jj='z -c'
+alias hh='z -c'
-alias jb='z -b'
+alias hb='z -b'
 alias t="todo.sh"
 alias ta="todo.sh add"
 alias tl="todo.sh list"
 alias td="todo.sh do"
 alias tp="todo.sh pri"
-alias vim="nvim"
+alias vim="lvim"
-alias viz="vim ~/.zshrc"
+alias viz="vim ${ZDOTDIR:-$HOME}/.zshrc"
 alias vit="vim ~/.tmux.conf"
 alias vip="vim ~/.config/polybar/config"
 alias viv="vim ~/.vimrc"
 alias viw="vim ~/.which-key.vim"
-alias via="vim ~/.aliases"
+alias via="vim ${ZDOTDIR:-$HOME}/.aliases"
 alias vi3="vim ~/.config/i3/config"
-alias connect="sudo vpnc kartaca-vpn"
+alias viq="vim ~/.config/qtile/config.py"
-alias disconnect="sudo vpnc-disconnect"
+alias top='htop'
+alias cp='cp -ri'
+alias mv='mv -i'
+alias mkdir='mkdir -p'
 alias dotfiles='/usr/bin/git --git-dir=$HOME/.cfg/ --work-tree=$HOME'

.config/zsh/.p10k.zsh

@@ -1,11 +1,11 @@
-# Generated by Powerlevel10k configuration wizard on 2021-04-23 at 12:14 +03.
+# Generated by Powerlevel10k configuration wizard on 2022-01-24 at 17:54 +03.
-# Based on romkatv/powerlevel10k/config/p10k-classic.zsh, checksum 40036.
+# Based on romkatv/powerlevel10k/config/p10k-lean.zsh, checksum 59558.
-# Wizard options: nerdfont-complete + powerline, small icons, classic, unicode, dark,
+# Wizard options: nerdfont-complete + powerline, large icons, unicode, lean, 24h time,
-# angled separators, sharp heads, flat tails, 2 lines, dotted, no frame, sparse,
+# 2 lines, dotted, no frame, light-ornaments, sparse, many icons, concise,
-# many icons, fluent, transient_prompt, instant_prompt=verbose.
+# transient_prompt, instant_prompt=verbose.
 # Type `p10k configure` to generate another config.
 #
-# Config for Powerlevel10k with classic powerline prompt style. Type `p10k configure` to generate
+# Config for Powerlevel10k with lean prompt style. Type `p10k configure` to generate
 # your own config based on it.
 #
 # Tip: Looking for a nice color? Here's a one-liner to print colormap.
@@ -33,7 +33,6 @@
   typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
     # =========================[ Line #1 ]=========================
     os_icon                 # os identifier
-    context                 # user@hostname
     dir                     # current directory
     vcs                     # git status
     # =========================[ Line #2 ]=========================
@@ -78,18 +77,21 @@
     haskell_stack           # haskell version from stack (https://haskellstack.org/)
     kubecontext             # current kubernetes context (https://kubernetes.io/)
     terraform               # terraform workspace (https://www.terraform.io)
+    # terraform_version     # terraform version (https://www.terraform.io)
     aws                     # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html)
     aws_eb_env              # aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/)
     azure                   # azure account name (https://docs.microsoft.com/en-us/cli/azure)
     gcloud                  # google cloud cli account and project (https://cloud.google.com/)
     google_app_cred         # google application credentials (https://cloud.google.com/docs/authentication/production)
+    toolbox                 # toolbox name (https://github.com/containers/toolbox)
+    context                 # user@hostname
     nordvpn                 # nordvpn connection status, linux only (https://nordvpn.com/)
     ranger                  # ranger shell (https://github.com/ranger/ranger)
     nnn                     # nnn shell (https://github.com/jarun/nnn)
+    xplr                    # xplr shell (https://github.com/sayanarijit/xplr)
     vim_shell               # vim shell indicator (:sh)
     midnight_commander      # midnight commander shell (https://midnight-commander.org/)
     nix_shell               # nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html)
-    # vi_mode               # vi mode (you don't need this if you've enabled prompt_char)
     # vpn_ip                # virtual private network indicator
     # load                  # CPU load
     # disk_usage            # disk usage
@@ -98,9 +100,9 @@
     todo                    # todo items (https://github.com/todotxt/todo.txt-cli)
     timewarrior             # timewarrior tracking status (https://timewarrior.net/)
     taskwarrior             # taskwarrior task count (https://taskwarrior.org/)
-    # time                  # current time
+    time                    # current time
     # =========================[ Line #2 ]=========================
-    # newline                 # \n
+    newline
     # ip                    # ip address and bandwidth usage for a specified network interface
     # public_ip             # public IP address
     # proxy                 # system-wide http/https/ftp proxy
@@ -113,7 +115,14 @@
   typeset -g POWERLEVEL9K_MODE=nerdfont-complete
   # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
   # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
-  typeset -g POWERLEVEL9K_ICON_PADDING=none
+  typeset -g POWERLEVEL9K_ICON_PADDING=moderate
+
+  # Basic style options that define the overall look of your prompt. You probably don't want to
+  # change them.
+  typeset -g POWERLEVEL9K_BACKGROUND=                            # transparent background
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE=  # no surrounding whitespace
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' '  # separate segments with a space
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR=        # no end-of-line symbol
 
   # When set to true, icons appear before content on both sides of the prompt. When set
   # to false, icons go after content. If empty or not set, icons go before content in the left
@@ -126,13 +135,12 @@
   # Or for a specific segment in specific state:
   #
   #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
-  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=
+  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true
 
   # Add an empty line before each prompt.
   typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true
 
-  # Connect left prompt lines with these symbols. You'll probably want to use the same color
+  # Connect left prompt lines with these symbols.
-  # as POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND below.
   typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=
   typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX=
   typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX=
@@ -141,54 +149,45 @@
   typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=
   typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=
 
-  # Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or
+  # The left end of left prompt.
-  # '─'. The last two make it easier to see the alignment between left and right prompt and to
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
-  # separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
+  # The right end of right prompt.
-  # for more compact prompt if using using this option.
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=
+
+  # Ruler, a.k.a. the horizontal line before each prompt. If you set it to true, you'll
+  # probably want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false above and
+  # POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' ' below.
+  typeset -g POWERLEVEL9K_SHOW_RULER=false
+  typeset -g POWERLEVEL9K_RULER_CHAR='─'        # reasonable alternative: '·'
+  typeset -g POWERLEVEL9K_RULER_FOREGROUND=242
+
+  # Filler between left and right prompt on the first prompt line. You can set it to '·' or '─'
+  # to make it easier to see the alignment between left and right prompt and to separate prompt
+  # from command output. It serves the same purpose as ruler (see above) without increasing
+  # the number of prompt lines. You'll probably want to set POWERLEVEL9K_SHOW_RULER=false
+  # if using this. You might also like POWERLEVEL9K_PROMPT_ADD_NEWLINE=false for more compact
+  # prompt.
   typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='·'
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND=
-  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_GAP_BACKGROUND=
   if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
-    # The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE
+    # The color of the filler.
-    # ornaments defined above.
+    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=242
-    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=240
+    # Add a space between the end of left prompt and the filler.
+    typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=' '
+    # Add a space between the filler and the start of right prompt.
+    typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL=' '
     # Start filler from the edge of the screen if there are no left segments on the first line.
     typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
     # End filler on the edge of the screen if there are no right segments on the first line.
     typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}'
   fi
 
-  # Default background color.
-  typeset -g POWERLEVEL9K_BACKGROUND=236
-
-  # Separator between same-color segments on the left.
-  typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='%244F\uE0B1'
-  # Separator between same-color segments on the right.
-  typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='%244F\uE0B3'
-  # Separator between different-color segments on the left.
-  typeset -g POWERLEVEL9K_LEFT_SEGMENT_SEPARATOR='\uE0B0'
-  # Separator between different-color segments on the right.
-  typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR='\uE0B2'
-  # The right end of left prompt.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0'
-  # The left end of right prompt.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2'
-  # The left end of left prompt.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=''
-  # The right end of right prompt.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
-  # Left prompt terminator for lines without any segments.
-  typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
-
   #################################[ os_icon: os identifier ]##################################
   # OS identifier color.
-  typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=255
+  typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=
   # Custom icon.
   # typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='⭐'
 
   ################################[ prompt_char: prompt symbol ]################################
-  # Transparent background.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_BACKGROUND=
   # Green prompt symbol if the last command succeeded.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=76
   # Red prompt symbol if the last command failed.
@@ -203,11 +202,9 @@
   typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
   typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
   # No line terminator if prompt_char is the last segment.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
   # No line introducer if prompt_char is the first segment.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
-  # No surrounding whitespace.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_{LEFT,RIGHT}_WHITESPACE=
 
   ##################################[ dir: current directory ]##################################
   # Default current directory color.
@@ -341,7 +338,7 @@
   # typeset -g POWERLEVEL9K_DIR_CLASSES=()
 
   # Custom prefix.
-  # typeset -g POWERLEVEL9K_DIR_PREFIX='%246Fin '
+  # typeset -g POWERLEVEL9K_DIR_PREFIX='%fin '
 
   #####################################[ vcs: git status ]######################################
   # Branch icon. Set this parameter to '\uF126 ' for the popular Powerline branch icon.
@@ -349,12 +346,11 @@
 
   # Untracked files icon. It's really a question mark, your font isn't broken.
   # Change the value of this parameter to show a different icon.
-  # typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
+  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
-  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON=' '
 
   # Formatter for Git status.
   #
-  # Example output: master ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
+  # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
   #
   # You can edit the function to customize how Git status looks.
   #
@@ -372,7 +368,7 @@
 
     if (( $1 )); then
       # Styling for up-to-date Git status.
-      local       meta='%246F'  # grey foreground
+      local       meta='%f'     # default foreground
       local      clean='%76F'   # green foreground
       local   modified='%178F'  # yellow foreground
       local  untracked='%39F'   # blue foreground
@@ -407,19 +403,24 @@
       # Otherwise show the first 12 … the last 12.
       # Tip: To always show tag name in full without truncation, delete the next line.
       (( $#tag > 32 )) && tag[13,-13]="…"  # <-- this line
-      res+="${meta} ${clean}${tag//\%/%%}"
+      res+="${meta}#${clean}${tag//\%/%%}"
     fi
 
     # Display the current Git commit if there is no branch and no tag.
     # Tip: To always display the current Git commit, delete the next line.
     [[ -z $VCS_STATUS_LOCAL_BRANCH && -z $VCS_STATUS_TAG ]] &&  # <-- this line
-      res+="${meta} ${clean}${VCS_STATUS_COMMIT[1,8]}"
+      res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}"
 
     # Show tracking branch name if it differs from local branch.
     if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
       res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"
     fi
 
+    # Display "wip" if the latest commit's summary contains "wip" or "WIP".
+    if [[ $VCS_STATUS_COMMIT_SUMMARY == (|*[^[:alnum:]])(wip|WIP)(|[^[:alnum:]]*) ]]; then
+      res+=" ${modified}wip"
+    fi
+
     # ⇣42 if behind the remote.
     (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
     # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
@@ -431,15 +432,15 @@
     # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
     (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
     # *42 if have stashes.
-    (( VCS_STATUS_STASHES        )) && res+=" ${clean} ${VCS_STATUS_STASHES}"
+    (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
     # 'merge' if the repo is in an unusual state.
     [[ -n $VCS_STATUS_ACTION     ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
     # ~42 if have merge conflicts.
     (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
     # +42 if have staged changes.
-    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified} ${VCS_STATUS_NUM_STAGED}"
+    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
     # !42 if have unstaged changes.
-    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified} ${VCS_STATUS_NUM_UNSTAGED}"
+    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
     # ?42 if have untracked files. It's really a question mark, your font isn't broken.
     # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
     # Remove the next line if you don't want to see untracked files at all.
@@ -483,7 +484,7 @@
   # Custom icon.
   # typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION='⭐'
   # Custom prefix.
-  typeset -g POWERLEVEL9K_VCS_PREFIX='%246Fon '
+  # typeset -g POWERLEVEL9K_VCS_PREFIX='%fon '
 
   # Show status of repositories of these types. You can add svn and/or hg if you are
   # using them. If you do, your prompt may become slow even when your current directory
@@ -538,19 +539,19 @@
   # Show this many fractional digits. Zero means round to seconds.
   typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
   # Execution time color.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=248
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=101
   # Duration format: 1d 2h 3m 4s.
   typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
   # Custom icon.
   # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
   # Custom prefix.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%246Ftook '
+  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook '
 
   #######################[ background_jobs: presence of background jobs ]#######################
   # Don't show the number of background jobs.
   typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
   # Background jobs color.
-  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=37
+  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=70
   # Custom icon.
   # typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
@@ -648,7 +649,7 @@
   # .NET Core version from asdf.
   typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_FOREGROUND=134
   # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_SHOW_ON_UPGLOB='*.foo|*.bar'
+  # typeset -g POWERLEVEL9K_ASDF_DOTNET_SHOW_ON_UPGLOB='*.foo|*.bar'
 
   # Flutter version from asdf.
   typeset -g POWERLEVEL9K_ASDF_FLUTTER_FOREGROUND=38
@@ -721,6 +722,12 @@
   # Custom icon.
   # typeset -g POWERLEVEL9K_NNN_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
+  ##################[ xplr: xplr shell (https://github.com/sayanarijit/xplr) ]##################
+  # xplr shell color.
+  typeset -g POWERLEVEL9K_XPLR_FOREGROUND=72
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_XPLR_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
   ###########################[ vim_shell: vim shell indicator (:sh) ]###########################
   # Vim shell indicator color.
   typeset -g POWERLEVEL9K_VIM_SHELL_FOREGROUND=34
@@ -756,23 +763,6 @@
   # Custom icon.
   # typeset -g POWERLEVEL9K_DISK_USAGE_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
-  ###########[ vi_mode: vi mode (you don't need this if you've enabled prompt_char) ]###########
-  # Text and color for normal (a.k.a. command) vi mode.
-  typeset -g POWERLEVEL9K_VI_COMMAND_MODE_STRING=NORMAL
-  typeset -g POWERLEVEL9K_VI_MODE_NORMAL_FOREGROUND=106
-  # Text and color for visual vi mode.
-  typeset -g POWERLEVEL9K_VI_VISUAL_MODE_STRING=VISUAL
-  typeset -g POWERLEVEL9K_VI_MODE_VISUAL_FOREGROUND=68
-  # Text and color for overtype (a.k.a. overwrite and replace) vi mode.
-  typeset -g POWERLEVEL9K_VI_OVERWRITE_MODE_STRING=OVERTYPE
-  typeset -g POWERLEVEL9K_VI_MODE_OVERWRITE_FOREGROUND=172
-  # Text and color for insert vi mode.
-  typeset -g POWERLEVEL9K_VI_INSERT_MODE_STRING=
-  typeset -g POWERLEVEL9K_VI_MODE_INSERT_FOREGROUND=66
-
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
   ######################################[ ram: free RAM ]#######################################
   # RAM color.
   typeset -g POWERLEVEL9K_RAM_FOREGROUND=66
@@ -875,7 +865,7 @@
   # Custom icon.
   # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
   # Custom prefix.
-  typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%246Fwith '
+  # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%fwith '
 
   ###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]###
   # Python virtual environment color.
@@ -941,10 +931,10 @@
   #
   # The default format has the following logic:
   #
-  # 1. Display "$P9K_CONTENT $P9K_PYENV_PYTHON_VERSION" if $P9K_PYENV_PYTHON_VERSION is not
+  # 1. Display just "$P9K_CONTENT" if it's equal to "$P9K_PYENV_PYTHON_VERSION" or
-  #   empty and unequal to $P9K_CONTENT.
+  #    starts with "$P9K_PYENV_PYTHON_VERSION/".
-  # 2. Otherwise display just "$P9K_CONTENT".
+  # 2. Otherwise display "$P9K_CONTENT $P9K_PYENV_PYTHON_VERSION".
-  typeset -g POWERLEVEL9K_PYENV_CONTENT_EXPANSION='${P9K_CONTENT}${${P9K_PYENV_PYTHON_VERSION:#$P9K_CONTENT}:+ $P9K_PYENV_PYTHON_VERSION}'
+  typeset -g POWERLEVEL9K_PYENV_CONTENT_EXPANSION='${P9K_CONTENT}${${P9K_CONTENT:#$P9K_PYENV_PYTHON_VERSION(|/*)}:+ $P9K_PYENV_PYTHON_VERSION}'
 
   # Custom icon.
   # typeset -g POWERLEVEL9K_PYENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
@@ -1167,43 +1157,10 @@
   # Custom icon.
   # typeset -g POWERLEVEL9K_HASKELL_STACK_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
-  ################[ terraform: terraform workspace (https://www.terraform.io) ]#################
-  # Don't show terraform workspace if it's literally "default".
-  typeset -g POWERLEVEL9K_TERRAFORM_SHOW_DEFAULT=false
-  # POWERLEVEL9K_TERRAFORM_CLASSES is an array with even number of elements. The first element
-  # in each pair defines a pattern against which the current terraform workspace gets matched.
-  # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
-  # that gets matched. If you unset all POWERLEVEL9K_TERRAFORM_*CONTENT_EXPANSION parameters,
-  # you'll see this value in your prompt. The second element of each pair in
-  # POWERLEVEL9K_TERRAFORM_CLASSES defines the workspace class. Patterns are tried in order. The
-  # first match wins.
-  #
-  # For example, given these settings:
-  #
-  #   typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=(
-  #     '*prod*'  PROD
-  #     '*test*'  TEST
-  #     '*'       OTHER)
-  #
-  # If your current terraform workspace is "project_test", its class is TEST because "project_test"
-  # doesn't match the pattern '*prod*' but does match '*test*'.
-  #
-  # You can define different colors, icons and content expansions for different classes:
-  #
-  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_FOREGROUND=28
-  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
-  typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=(
-      # '*prod*'  PROD    # These values are examples that are unlikely
-      # '*test*'  TEST    # to match your needs. Customize them as needed.
-      '*'         OTHER)
-  typeset -g POWERLEVEL9K_TERRAFORM_OTHER_FOREGROUND=38
-  # typeset -g POWERLEVEL9K_TERRAFORM_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
   #############[ kubecontext: current kubernetes context (https://kubernetes.io/) ]#############
-  # Show kubecontext only when the the command you are typing invokes one of these tools.
+  # Show kubecontext only when the command you are typing invokes one of these tools.
   # Tip: Remove the next line to always show kubecontext.
-  typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens|kubectx|oc|istioctl|kogito|k9s|helmfile|fluxctl|stern'
+  typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens|kubectx|oc|istioctl|kogito|k9s|helmfile|flux|fluxctl|stern'
 
   # Kubernetes context classes for the purpose of using different colors, icons and expansions with
   # different contexts.
@@ -1285,10 +1242,49 @@
   POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${${:-/$P9K_KUBECONTEXT_NAMESPACE}:#/default}'
 
   # Custom prefix.
-  typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='%246Fat '
+  # typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='%fat '
+
+  ################[ terraform: terraform workspace (https://www.terraform.io) ]#################
+  # Don't show terraform workspace if it's literally "default".
+  typeset -g POWERLEVEL9K_TERRAFORM_SHOW_DEFAULT=false
+  # POWERLEVEL9K_TERRAFORM_CLASSES is an array with even number of elements. The first element
+  # in each pair defines a pattern against which the current terraform workspace gets matched.
+  # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
+  # that gets matched. If you unset all POWERLEVEL9K_TERRAFORM_*CONTENT_EXPANSION parameters,
+  # you'll see this value in your prompt. The second element of each pair in
+  # POWERLEVEL9K_TERRAFORM_CLASSES defines the workspace class. Patterns are tried in order. The
+  # first match wins.
+  #
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=(
+  #     '*prod*'  PROD
+  #     '*test*'  TEST
+  #     '*'       OTHER)
+  #
+  # If your current terraform workspace is "project_test", its class is TEST because "project_test"
+  # doesn't match the pattern '*prod*' but does match '*test*'.
+  #
+  # You can define different colors, icons and content expansions for different classes:
+  #
+  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_FOREGROUND=28
+  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_TERRAFORM_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
+  typeset -g POWERLEVEL9K_TERRAFORM_CLASSES=(
+      # '*prod*'  PROD    # These values are examples that are unlikely
+      # '*test*'  TEST    # to match your needs. Customize them as needed.
+      '*'         OTHER)
+  typeset -g POWERLEVEL9K_TERRAFORM_OTHER_FOREGROUND=38
+  # typeset -g POWERLEVEL9K_TERRAFORM_OTHER_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #############[ terraform_version: terraform version (https://www.terraform.io) ]##############
+  # Terraform version color.
+  typeset -g POWERLEVEL9K_TERRAFORM_VERSION_FOREGROUND=38
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_TERRAFORM_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   #[ aws: aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) ]#
-  # Show aws only when the the command you are typing invokes one of these tools.
+  # Show aws only when the command you are typing invokes one of these tools.
   # Tip: Remove the next line to always show aws.
   typeset -g POWERLEVEL9K_AWS_SHOW_ON_COMMAND='aws|awless|terraform|pulumi|terragrunt'
 
@@ -1322,6 +1318,12 @@
   typeset -g POWERLEVEL9K_AWS_DEFAULT_FOREGROUND=208
   # typeset -g POWERLEVEL9K_AWS_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
+  # AWS segment format. The following parameters are available within the expansion.
+  #
+  # - P9K_AWS_PROFILE  The name of the current AWS profile.
+  # - P9K_AWS_REGION   The region associated with the current AWS profile.
+  typeset -g POWERLEVEL9K_AWS_CONTENT_EXPANSION='${P9K_AWS_PROFILE//\%/%%}${P9K_AWS_REGION:+ ${P9K_AWS_REGION//\%/%%}}'
+
   #[ aws_eb_env: aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/) ]#
   # AWS Elastic Beanstalk environment color.
   typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=70
@@ -1329,7 +1331,7 @@
   # typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   ##########[ azure: azure account name (https://docs.microsoft.com/en-us/cli/azure) ]##########
-  # Show azure only when the the command you are typing invokes one of these tools.
+  # Show azure only when the command you are typing invokes one of these tools.
   # Tip: Remove the next line to always show azure.
   typeset -g POWERLEVEL9K_AZURE_SHOW_ON_COMMAND='az|terraform|pulumi|terragrunt'
   # Azure account name color.
@@ -1338,9 +1340,9 @@
   # typeset -g POWERLEVEL9K_AZURE_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   ##########[ gcloud: google cloud account and project (https://cloud.google.com/) ]###########
-  # Show gcloud only when the the command you are typing invokes one of these tools.
+  # Show gcloud only when the command you are typing invokes one of these tools.
   # Tip: Remove the next line to always show gcloud.
-  typeset -g POWERLEVEL9K_GCLOUD_SHOW_ON_COMMAND='gcloud|gcs'
+  typeset -g POWERLEVEL9K_GCLOUD_SHOW_ON_COMMAND='gcloud|gcs|gsutil'
    # Google cloud color.
   typeset -g POWERLEVEL9K_GCLOUD_FOREGROUND=32
 
@@ -1379,7 +1381,7 @@
   # typeset -g POWERLEVEL9K_GCLOUD_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   #[ google_app_cred: google application credentials (https://cloud.google.com/docs/authentication/production) ]#
-  # Show google_app_cred only when the the command you are typing invokes one of these tools.
+  # Show google_app_cred only when the command you are typing invokes one of these tools.
   # Tip: Remove the next line to always show google_app_cred.
   typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_SHOW_ON_COMMAND='terraform|pulumi|terragrunt'
 
@@ -1432,6 +1434,16 @@
   # Note: ${VARIABLE//\%/%%} expands to ${VARIABLE} with all occurrences of '%' replaced by '%%'.
   typeset -g POWERLEVEL9K_GOOGLE_APP_CRED_DEFAULT_CONTENT_EXPANSION='${P9K_GOOGLE_APP_CRED_PROJECT_ID//\%/%%}'
 
+  ##############[ toolbox: toolbox name (https://github.com/containers/toolbox) ]###############
+  # Toolbox color.
+  typeset -g POWERLEVEL9K_TOOLBOX_FOREGROUND=178
+  # Don't display the name of the toolbox if it matches fedora-toolbox-*.
+  typeset -g POWERLEVEL9K_TOOLBOX_CONTENT_EXPANSION='${P9K_TOOLBOX_NAME:#fedora-toolbox-*}'
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_TOOLBOX_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_TOOLBOX_PREFIX='%fin '
+
   ###############################[ public_ip: public IP address ]###############################
   # Public IP color.
   typeset -g POWERLEVEL9K_PUBLIC_IP_FOREGROUND=94
@@ -1460,14 +1472,16 @@
   # The following parameters are accessible within the expansion:
   #
   #   Parameter             | Meaning
-  #   ----------------------+---------------
+  #   ----------------------+-------------------------------------------
-  #   P9K_IP_IP         | IP address
+  #   P9K_IP_IP             | IP address
-  #   P9K_IP_INTERFACE  | network interface
+  #   P9K_IP_INTERFACE      | network interface
-  #   P9K_IP_RX_BYTES   | total number of bytes received
+  #   P9K_IP_RX_BYTES       | total number of bytes received
-  #   P9K_IP_TX_BYTES   | total number of bytes sent
+  #   P9K_IP_TX_BYTES       | total number of bytes sent
-  #   P9K_IP_RX_RATE    | receive rate (since last prompt)
+  #   P9K_IP_RX_BYTES_DELTA | number of bytes received since last prompt
-  #   P9K_IP_TX_RATE    | send rate (since last prompt)
+  #   P9K_IP_TX_BYTES_DELTA | number of bytes sent since last prompt
-  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='${P9K_IP_RX_RATE:+%70F⇣$P9K_IP_RX_RATE }${P9K_IP_TX_RATE:+%215F⇡$P9K_IP_TX_RATE }%38F$P9K_IP_IP'
+  #   P9K_IP_RX_RATE        | receive rate (since last prompt)
+  #   P9K_IP_TX_RATE        | send rate (since last prompt)
+  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='$P9K_IP_IP${P9K_IP_RX_RATE:+ %70F⇣$P9K_IP_RX_RATE}${P9K_IP_TX_RATE:+ %215F⇡$P9K_IP_TX_RATE}'
   # Show information for the first network interface whose name matches this regular expression.
   # Run `ifconfig` or `ip -4 a show` to see the names of all network interfaces.
   typeset -g POWERLEVEL9K_IP_INTERFACE='[ew].*'
@@ -1531,7 +1545,7 @@
   # Custom icon.
   # typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
   # Custom prefix.
-  typeset -g POWERLEVEL9K_TIME_PREFIX='%246Fat '
+  # typeset -g POWERLEVEL9K_TIME_PREFIX='%fat '
 
   # Example of a user-defined prompt segment. Function prompt_example will be called on every
   # prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or

.config/zsh/.zlogin

@@ -0,0 +1,26 @@
+#
+# Executes commands at login post-zshrc.
+#
+# Authors:
+#   Sorin Ionescu <sorin.ionescu@gmail.com>
+#
+
+# Execute code that does not affect the current session in the background.
+{
+  # Compile the completion dump to increase startup speed.
+  zcompdump="${XDG_CACHE_HOME:-$HOME/.cache}/prezto/zcompdump"
+  if [[ -s "$zcompdump" && (! -s "${zcompdump}.zwc" || "$zcompdump" -nt "${zcompdump}.zwc") ]]; then
+    zcompile "$zcompdump"
+  fi
+} &!
+
+# Execute code only if STDERR is bound to a TTY.
+if [[ -o INTERACTIVE && -t 2 ]]; then
+
+  # Print a random, hopefully interesting, adage.
+  if (( $+commands[fortune] )); then
+    fortune -s
+    print
+  fi
+
+fi >&2

.config/zsh/.zlogout

@@ -0,0 +1,19 @@
+#
+# Executes commands at logout.
+#
+# Authors:
+#   Sorin Ionescu <sorin.ionescu@gmail.com>
+#
+
+# Execute code only if STDERR is bound to a TTY.
+[[ -o INTERACTIVE && -t 2 ]] && {
+
+SAYINGS=(
+    "So long and thanks for all the fish.\n  -- Douglas Adams"
+    "Good morning! And in case I don't see ya, good afternoon, good evening and goodnight.\n  --Truman Burbank"
+)
+
+# Print a randomly-chosen message:
+echo $SAYINGS[$(($RANDOM % ${#SAYINGS} + 1))]
+
+} >&2

.config/zsh/.zpreztorc

@@ -0,0 +1,237 @@
+#
+# Sets Prezto options.
+#
+# Authors:
+#   Sorin Ionescu <sorin.ionescu@gmail.com>
+#
+
+#
+# General
+#
+
+# Set case-sensitivity for completion, history lookup, etc.
+# zstyle ':prezto:*:*' case-sensitive 'yes'
+
+# Color output (auto set to 'no' on dumb terminals).
+zstyle ':prezto:*:*' color 'yes'
+
+# Add additional directories to load prezto modules from
+# zstyle ':prezto:load' pmodule-dirs $HOME/.zprezto-contrib
+
+# Allow module overrides when pmodule-dirs causes module name collisions
+# zstyle ':prezto:load' pmodule-allow-overrides 'yes'
+
+# Set the Zsh modules to load (man zshmodules).
+# zstyle ':prezto:load' zmodule 'attr' 'stat'
+
+# Set the Zsh functions to load (man zshcontrib).
+# zstyle ':prezto:load' zfunction 'zargs' 'zmv'
+
+# Set the Prezto modules to load (browse modules).
+# The order matters.
+zstyle ':prezto:load' pmodule \
+  'environment' \
+  'terminal' \
+  'editor' \
+  'history' \
+  'directory' \
+  'spectrum' \
+  'utility' \
+  'rsync' \
+  'tmux' \
+  'completion' \
+  'syntax-highlighting' \
+  'history-substring-search' \
+  'autosuggestions' \
+  'prompt'
+
+  # 'archive' \ archive things
+  # 'rsync' \ rsync-copy rsync-move
+  # 'git' \ use oh my zsh git
+  # https://github.com/Asocia/prezto/tree/master/modules/spectrum
+#
+# Autosuggestions
+#
+
+# Set the query found color.
+zstyle ':prezto:module:autosuggestions:color' found 'fg=32,bold'
+
+#
+# Completions
+#
+
+# Set the entries to ignore in static '/etc/hosts' for host completion.
+# zstyle ':prezto:module:completion:*:hosts' etc-host-ignores \
+#   '0.0.0.0' '127.0.0.1'
+
+#
+# Editor
+#
+
+# Set the key mapping style to 'emacs' or 'vi'.
+zstyle ':prezto:module:editor' key-bindings 'vi'
+
+# Auto convert .... to ../..
+zstyle ':prezto:module:editor' dot-expansion 'yes'
+
+# Allow the zsh prompt context to be shown.
+zstyle ':prezto:module:editor' ps-context 'yes'
+
+#
+# Git
+#
+
+# Ignore submodules when they are 'dirty', 'untracked', 'all', or 'none'.
+# zstyle ':prezto:module:git:status:ignore' submodules 'all'
+
+#
+# GNU Utility
+#
+
+# Set the command prefix on non-GNU systems.
+# zstyle ':prezto:module:gnu-utility' prefix 'g'
+
+#
+# History Substring Search
+#
+
+# Set the query found color.
+# zstyle ':prezto:module:history-substring-search:color' found ''
+
+# Set the query not found color.
+# zstyle ':prezto:module:history-substring-search:color' not-found ''
+
+# Set the search globbing flags.
+# zstyle ':prezto:module:history-substring-search' globbing-flags ''
+
+#
+# macOS
+#
+
+# Set the keyword used by `mand` to open man pages in Dash.app
+# zstyle ':prezto:module:osx:man' dash-keyword 'manpages'
+
+#
+# Pacman
+#
+
+# Set the Pacman frontend.
+# zstyle ':prezto:module:pacman' frontend 'yaourt'
+
+#
+# Prompt
+#
+
+# Set the prompt theme to load.
+# Setting it to 'random' loads a random theme.
+# Auto set to 'off' on dumb terminals.
+zstyle ':prezto:module:prompt' theme 'powerlevel10k'
+
+# Set the working directory prompt display length.
+# By default, it is set to 'short'. Set it to 'long' (without '~' expansion)
+# for longer or 'full' (with '~' expansion) for even longer prompt display.
+# zstyle ':prezto:module:prompt' pwd-length 'short'
+
+# Set the prompt to display the return code along with an indicator for non-zero
+# return codes. This is not supported by all prompts.
+# zstyle ':prezto:module:prompt' show-return-val 'yes'
+
+#
+# Python
+#
+
+# Auto switch the Python virtualenv on directory change.
+# zstyle ':prezto:module:python:virtualenv' auto-switch 'yes'
+
+# Automatically initialize virtualenvwrapper if pre-requisites are met.
+# zstyle ':prezto:module:python:virtualenv' initialize 'yes'
+
+#
+# Ruby
+#
+
+# Auto switch the Ruby version on directory change.
+# zstyle ':prezto:module:ruby:chruby' auto-switch 'yes'
+
+#
+# Screen
+#
+
+# Auto start a session when Zsh is launched in a local terminal.
+# zstyle ':prezto:module:screen:auto-start' local 'yes'
+
+# Auto start a session when Zsh is launched in a SSH connection.
+# zstyle ':prezto:module:screen:auto-start' remote 'yes'
+
+#
+# SSH
+#
+
+# Set the SSH identities to load into the agent.
+# zstyle ':prezto:module:ssh:load' identities 'id_rsa' 'id_rsa2' 'id_github'
+
+#
+# Syntax Highlighting
+#
+
+# Set syntax highlighters.
+# By default, only the main highlighter is enabled.
+zstyle ':prezto:module:syntax-highlighting' highlighters \
+  'main' \
+  'brackets' \
+  'pattern' \
+  'line' \
+  'cursor' \
+  'root'
+#
+# Set syntax highlighting styles.
+# zstyle ':prezto:module:syntax-highlighting' styles \
+#   'builtin' 'bg=blue' \
+#   'command' 'bg=blue' \
+#   'function' 'bg=blue'
+#
+# Set syntax pattern styles.
+# zstyle ':prezto:module:syntax-highlighting' pattern \
+#   'rm*-rf*' 'fg=white,bold,bg=red'
+
+#
+# Terminal
+#
+
+# Auto set the tab and window titles.
+# zstyle ':prezto:module:terminal' auto-title 'yes'
+
+# Set the window title format.
+# zstyle ':prezto:module:terminal:window-title' format '%n@%m: %s'
+
+# Set the tab title format.
+# zstyle ':prezto:module:terminal:tab-title' format '%m: %s'
+
+# Set the terminal multiplexer title format.
+# zstyle ':prezto:module:terminal:multiplexer-title' format '%s'
+
+#
+# Tmux
+#
+
+# Auto start a session when Zsh is launched in a local terminal.
+zstyle ':prezto:module:tmux:auto-start' local 'yes'
+
+# Auto start a session when Zsh is launched in a SSH connection.
+# zstyle ':prezto:module:tmux:auto-start' remote 'yes'
+
+# Integrate with iTerm2.
+# zstyle ':prezto:module:tmux:iterm' integrate 'yes'
+
+# Set the default session name:
+session_name=$(echo $TERM | cut -d"-" -f1)
+zstyle ':prezto:module:tmux:session' name $session_name
+
+#
+# Utility
+#
+
+# Enabled safe options. This aliases cp, ln, mv and rm so that they prompt
+# before deleting or overwriting files. Set to 'no' to disable this safer
+# behavior.
+# zstyle ':prezto:module:utility' safe-ops 'yes'

.config/zsh/.zprofile

@@ -0,0 +1,65 @@
+#
+# Executes commands at login pre-zshrc.
+#
+# Authors:
+#   Sorin Ionescu <sorin.ionescu@gmail.com>
+#
+
+export XDG_CONFIG_HOME="${XDG_CONFIG_HOME:-$HOME/.config}"
+
+#
+# Browser
+#
+
+if [[ "$OSTYPE" == darwin* ]]; then
+  export BROWSER='open'
+fi
+
+#
+# Editors
+#
+
+export EDITOR='vim'
+export VISUAL="$EDITOR"
+export PAGER='less'
+
+#
+# Language
+#
+
+if [[ -z "$LANG" ]]; then
+  export LANG='en_US.UTF-8'
+fi
+
+#
+# Paths
+#
+
+# Ensure path arrays do not contain duplicates.
+typeset -gU cdpath fpath mailpath path
+
+# Set the list of directories that cd searches.
+# cdpath=(
+#   $cdpath
+# )
+
+# Set the list of directories that Zsh searches for programs.
+path=(
+  /usr/local/{bin,sbin}
+  $path
+)
+
+#
+# Less
+#
+
+# Set the default Less options.
+# Mouse-wheel scrolling has been disabled by -X (disable screen clearing).
+# Remove -X to enable it.
+export LESS='-g -i -M -R -S -w -X -z-4'
+
+# Set the Less input preprocessor.
+# Try both `lesspipe` and `lesspipe.sh` as either might exist on a system.
+if (( $#commands[(i)lesspipe(|.sh)] )); then
+  export LESSOPEN="| /usr/bin/env $commands[(i)lesspipe(|.sh)] %s 2>&-"
+fi

.config/zsh/.zshenv

@@ -0,0 +1,11 @@
+#
+# Defines environment variables.
+#
+# Authors:
+#   Sorin Ionescu <sorin.ionescu@gmail.com>
+#   Şahin Akkaya <sahin@sahinakkaya.dev>
+
+# Ensure that a non-login, non-interactive shell has a defined environment.
+if [[ ( "$SHLVL" -eq 1 && ! -o LOGIN ) && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
+  source "${ZDOTDIR:-$HOME}/.zprofile"
+fi

.config/zsh/.zshrc

@@ -0,0 +1,100 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.config/zsh/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+#
+# Executes commands at the start of an interactive session.
+#
+# Authors:
+#   Sorin Ionescu <sorin.ionescu@gmail.com>
+#
+
+
+# Source Prezto.
+if [[ -s "${ZDOTDIR:-$HOME}/.zprezto/init.zsh" ]]; then
+  source "${ZDOTDIR:-$HOME}/.zprezto/init.zsh"
+fi
+
+
+# Customize to your needs...
+source "${ZDOTDIR:-$HOME}/.aliases"
+
+ZSH_AUTOSUGGEST_STRATEGY=(history completion)
+ZSH_AUTOSUGGEST_MANUAL_REBIND=true
+
+
+export PATH=$PATH:$HOME/.pyenv/bin/
+
+# To customize prompt, run `p10k configure` or edit ~/.config/zsh/.p10k.zsh.
+[[ ! -f ~/.config/zsh/.p10k.zsh ]] || source ~/.config/zsh/.p10k.zsh
+
+### Added by Zinit's installer
+if [[ ! -f $HOME/.local/share/zinit/zinit.git/zinit.zsh ]]; then
+    print -P "%F{33} %F{220}Installing %F{33}ZDHARMA-CONTINUUM%F{220} Initiative Plugin Manager (%F{33}zdharma-continuum/zinit%F{220})…%f"
+    command mkdir -p "$HOME/.local/share/zinit" && command chmod g-rwX "$HOME/.local/share/zinit"
+    command git clone https://github.com/zdharma-continuum/zinit "$HOME/.local/share/zinit/zinit.git" && \
+        print -P "%F{33} %F{34}Installation successful.%f%b" || \
+        print -P "%F{160} The clone has failed.%f%b"
+fi
+
+source "$HOME/.local/share/zinit/zinit.git/zinit.zsh"
+autoload -Uz _zinit
+(( ${+_comps} )) && _comps[zinit]=_zinit
+
+# Load a few important annexes, without Turbo
+# (this is currently required for annexes)
+zinit light-mode for \
+    zdharma-continuum/zinit-annex-as-monitor \
+    zdharma-continuum/zinit-annex-bin-gem-node \
+    zdharma-continuum/zinit-annex-patch-dl \
+    zdharma-continuum/zinit-annex-rust
+
+### End of Zinit's installer chunk
+
+zinit snippet OMZ::plugins/git/git.plugin.zsh
+zinit light skywind3000/z.lua
+
+# ZVM
+function zvm_config() {
+  ZVM_LINE_INIT_MODE=$ZVM_MODE_INSERT
+  # ZVM_INSERT_MODE_CURSOR=$ZVM_CURSOR_BLOCK
+  ZVM_LAZY_KEYBINDINGS=true
+  ZVM_VI_INSERT_ESCAPE_BINDKEY=kj
+}
+
+zinit ice depth=1
+zinit light jeffreytse/zsh-vi-mode
+
+# The plugin will auto execute this zvm_after_init function
+function zvm_after_init() {
+    [ -f ~/.fzf.zsh ] && source ~/.fzf.zsh
+
+    bindkey '^b' backward-word
+    bindkey '^f' forward-word
+    bindkey '^g' autosuggest-accept
+    # allow ctrl-r and ctrl-s to search the history
+    bindkey '^r' history-incremental-search-backward
+    bindkey '^s' history-incremental-search-forward
+
+
+    # allow ctrl-a and ctrl-e to move to beginning/end of line
+    bindkey '^a' beginning-of-line
+    bindkey '^e' end-of-line
+
+
+    # allow ctrl-h, ctrl-w, ctrl-? for char and word deletion (standard behaviour)
+    bindkey '^h' backward-delete-char
+    bindkey '^w' backward-kill-word
+
+
+    bindkey '^x' fzf-cd-widget
+    bindkey "\e\e" fuck-command-line
+    bindkey "\e[1;3D" dirhistory_zle_dirhistory_back
+    bindkey "\e[1;3C" dirhistory_zle_dirhistory_future
+    bindkey "\e[1;3A" dirhistory_zle_dirhistory_up
+    bindkey "\e[1;3B" dirhistory_zle_dirhistory_down
+}
+

.zshrc

@@ -1,132 +0,0 @@
-# Always start a tmux session when opening up terminal
-if type tmux &> /dev/null; then
-    session_name=${TERMINAL_NAME:-Terminal}
-    #if not inside a tmux session, start a new session
-    if [[ $HOST == "ubuntu" && -z "$TMUX" ]]; then
-        ( TERM=xterm-256color tmux -2 new-session -A -s $session_name || false)
-        # || false makes Konsole happy while quitting. It doesn't ask for
-        # confirmation. Since we are in tmux, it doesn't matter if we really
-        # wanted to quit or not
-    fi
-fi
-# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
-# Initialization code that may require console input (password prompts, [y/n]
-# confirmations, etc.) must go above this block, everything else may go below.
-if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
-  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
-fi
-
-# secret environment variables goes in /etc/environment
-# sudoedit /etc/environment
-
-# If you come from bash you might have to change your $PATH.
-# export PATH=$HOME/bin:/usr/local/bin:$PATH
-# Path to your oh-my-zsh installation.
-# export TERM="xterm-256color"
-export ZSH="$HOME/.oh-my-zsh"
-
-POWERLEVEL9K_MODE='nerdfont-complete'
-ZSH_THEME="powerlevel10k/powerlevel10k"
-
-# Uncomment the following line to use hyphen-insensitive completion.
-# Case-sensitive completion must be off. _ and - will be interchangeable.
-# HYPHEN_INSENSITIVE="true"
-
-# Uncomment the following line to enable command auto-correction.
-# ENABLE_CORRECTION="true"
-
-# Uncomment the following line to display red dots whilst waiting for completion.
-COMPLETION_WAITING_DOTS="true"
-
-# Uncomment the following line if you want to disable marking untracked files
-# under VCS as dirty. This makes repository status check for large repositories
-# much, much faster.
-DISABLE_UNTRACKED_FILES_DIRTY="true"
-
-# Uncomment the following line if you want to change the command execution time
-# stamp shown in the history command output.
-# You can set one of the optional three formats:
-# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
-# or set a custom format using the strftime function format specifications,
-# see 'man strftime' for details.
-HIST_STAMPS="mm/dd/yyyy"
-
-# plugins=()
-plugins=(
-  gitignore alias-finder zsh-autosuggestions pip last-working-dir dirhistory history thefuck command-not-found git extract zsh-syntax-highlighting docker docker-compose zsh-vi-mode z.lua pyenv-lazy
-)
-# plugins+=(zsh-prompt-benchmark)
-
-
-ZVM_LAZY_KEYBINDINGS=false
-ZVM_VI_INSERT_ESCAPE_BINDKEY=kj
-
-
-source $ZSH/oh-my-zsh.sh
-source ~/.p10k.zsh
-
-# https://stackoverflow.com/questions/28028740/git-tab-completion-in-zsh-throwing-errors
-zstyle ':completion:*:*:git:*' script ~/.git-completion.bash
-fpath=(~/.zsh $fpath)
-
-unsetopt nomatch
-
-export LANG=en_US.UTF-8
-export VISUAL=nvim
-export EDITOR="$VISUAL"
-export PYTHONBREAKPOINT=ipdb.set_trace
-export ZSH_AUTOSUGGEST_USE_ASYNC=true
-export ZSH_AUTOSUGGEST_HIGHLIGHT_STYLE='fg=32'
-export ZSH_AUTOSUGGEST_MANUAL_REBIND=true
-export FZF_DEFAULT_COMMAND='ag --hidden --ignore .git -l -g ""'
-export FZF_DEFAULT_OPTS='--bind change:top'
-# export TERM_ITALICS=false
-export PATH="$HOME/.poetry/bin:$PATH"
-export PATH=$PATH:$HOME/scripts
-
-
-# . /usr/share/autojump/autojump.sh
-export PATH="/snap/bin:$PATH"
-export PYENV_VIRTUALENV_DISABLE_PROMPT=1
-
-
-# If not in tmux session, add battery and time to prompt
-[[ -n $TMUX ]] || POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS+=(battery time)
-
-
-# https://github.com/jeffreytse/zsh-vi-mode#execute-extra-commands
-function my_bindings() {
-    # easy bindings instead of ctrl + arrow keys
-    bindkey '^b' backward-word
-    bindkey '^f' forward-word
-    bindkey '^g' autosuggest-accept
-    bindkey "\e\e" fuck-command-line
-    bindkey "\e[1;3D" dirhistory_zle_dirhistory_back
-    bindkey "\e[1;3C" dirhistory_zle_dirhistory_future
-    bindkey "\e[1;3A" dirhistory_zle_dirhistory_up
-    bindkey "\e[1;3B" dirhistory_zle_dirhistory_down
-}
-
-chbackground() {
-    if [ "$3" == "" ]
-    then
-      wal -st -i ~/Pictures/Wallpapers/Desktop --backend=haishoku --iterative
-      python3 ~/scripts/misc/adjust_terminal_colors.py $1 $2
-      ~/scripts/misc/restart_dunst.sh
-    else
-      python3 ~/scripts/misc/adjust_terminal_colors.py $1 $2 dummy
-    fi
-
-}
-
-chcolors() {
-  chbackground $1 $2 dummy
-}
-
-
-zvm_after_init_commands+=('[ -f ~/.fzf.zsh ] && source ~/.fzf.zsh')
-zvm_after_init_commands+=(my_bindings)
-ZVM_LINE_INIT_MODE=$ZVM_MODE_INSERT # Always starting with insert mode for each command line
-ZVM_INSERT_MODE_CURSOR=$ZVM_CURSOR_BLOCK
-
-autoload -U compinit; compinit -y